JUKI SC-920 User Manual

SC-920
INSTRUCTION MANUAL
No.04
40087108

JUKI SC-920 Specifications

General

Stitch Type	Lockstitch
Thread Trimmer	Automatic
Work Clamp	Pneumatic
Power Consumption	550W
Motor Type	AC servo motor
Hook	Full rotary hook

Summary

Set-Up

Changing over the voltage between 100 V and 200 V

Procedure for adjusting the SC-920 control box voltage settings for different power sources.

Installing to the table

Installing the control panel

Connecting the cords

Details on connecting various cables and connectors to the SC-920 control box.

Setting procedure of the machine head

Steps to configure the control box for the specific sewing machine head model.

Adjusting the machine head (direct-drive motor type sewing machine only)

For the Operator

Operating procedure of the sewing machine

Basic steps for operating the sewing machine using the SC-920 control.

Operating procedure of the sewing pattern

How to program and use various sewing patterns like reverse feed stitching.

Setting of functions of SC-920

Detailed guide on how to select and specify various functions of the SC-920.

Detailed explanation of selection of functions

Automatic compensation of neutral point of the pedal sensor

Setting of the auto lifter function

Connection of the material end sensor

Initialization of the setting data

Maintenance

Replacing the fuse

Error codes

List of error codes, their causes, and recommended corrective measures.