Julabo CF41 - Termination of a Profile

Menu functions
48
8.3.4. Termination of a profile
Setp : 125.80°C
IntAct: 124.70°C
Prof. : 4 Step:12
Remain: 00:03:45

>Start Profile x
at Step x
Runs 1
Start no
Programmer Start
 A profile can be terminated by pressing . The programmer
switches back to the Start menu.
• Press
again to quit the menu
or
use the keys
to remain in the Start menu.
The start of another temperature profile can now be prepared if
necessary.
Example:
Setpoint1: 150.00°C
IntAct : 83.24°C
Power : 0 %
Control : intern
-OFF-
S 150.00
E -----
Interruption after a power failure
In case of a power failure, the reaction of the Cryo-Compact Circulator
is the same as when switched off and on again with the mains switch.
The LCD DIALOG-DISPLAY gives information on the adjustments and
conditions of the Cryo-Compact Circulator .
The VFD COMFORT-DISPLAY indicates "OFF".