JUMO cTRON 04 User Manual

23
4 Operation
4.3 User level configuration
A maximum of eight parameters to be available in the user level can be
selected in the setup program.
The user can assign a name to each parameter which appears on the
device. Four characters that can be presented by a 7-segment display
are permissible. If no name is assigned, the name used in factory
appears on the device.
The following figure shows an example (ex-factory all parameters are
switched off).

JUMO cTRON 04 Specifications

General

Brand	JUMO
Model	cTRON 04
Category	Controller
Language	English