JUMO cTRON 04 User Manual

33
7 Configuration level
Levels can be inhibited.
Ö Chapter 4.4 „Level inhibit“
TIP!
Parameters are not displayed unless the equipment level
permits the function assigned to the parameter. This
means, for example, that interface parameters can only be
configured, if the device is equipped with an interface.
TIP!
Some parameters can only be programmed through the
setup program. In the following tables, these are marked in
the "Parameters" column with "(Setup)".
TIP!
Factory settings are displayed
bold in the following tables
in the "Value/Selection" and "Description" columns.
Normal display
ConF
>2s
oder timeout
PArA
1
P
P
F
EXIT
P
P
OPr/USEr
1. Either the operator ( ) or
the user level ( ) exists
OPr
USEr
- Analog input
- Controller
- Ramp function
- Limit comparators
- Binary functions
- Display
- Interface
InP
Cntr
rFCt
LC
binF
diSP
IntF
- Timer
Outputs
tFCt
- OutP
Configuration level ConF
Navigation principle
F
EXIT
P
P
one level
backward
one level
forward
next/previous
parameter

JUMO cTRON 04 Specifications

General

Brand	JUMO
Model	cTRON 04
Category	Controller
Language	English