4 Operation
26
Time entry
A decimal place is mapped in the centre and on the right to display
times.
The time unit can be configured.
Ö Chapter 7.5 „Timer“
1. Select parameter by pressing or
2. Change to the entry mode using
(lower display blinks)
3. Change a value using and
The value alters dynamically for as long as the key is kept pressed.
4. Take over the entry with
or automatic return after 2s
or cancel the entry with
The value will not be applied.
P
P
Change value
(top - red)
Parameter flashes
Select Parameter
(bottom - green)
To Next Page
Loading...
Need help?
General
