12 Appendix
107
Unit name
-colour
Designation of the printing recorder
Colour of the instrument designation
R, S
S
Open-collector output Status (on /off) for each limit signal and the fault signal output R, S
Speed, limit operation
(feed limit)
Chart speed in mm/h, which is activated by going above or below the limits which have
been entered
R, S
Timed operation
(feed time)
Chart speed for a defined period of time R, S
Print
speed change
Status for the printout of the speed change R, S
Print
“power on ” text
Status and text for the printout when the supply is switched on R, S
Print
“power off” text
Status and text for the printout when the supply is switched off
(this printout only appears at the next switch-on)
R, S
Print scaling Spacing (in cm) of the cyclic scaling printout R, S
Print time Spacing (in cm) of the cyclic time printout R, S
Print
channel number
Spacing (in cm) of the cyclic channel-number printout R, S
Report Sets the period for the statistical report R, S
Start text Text which is printed at the start of recording R, S
End text Text which is printed at the end of recording R, S
Printing priorities Priorities for printing texts S
Printing mode Overwrite/interrupt the measurement curve for printing texts S
Default setting
(presetting)
Reset parameters R, S
Code number Alter the two code numbers R, S
Parameter Description Programming
S = via setup
R = on recorder
To Next Page