6 Decommissioning the Industrial Truck
If the truck is to be out of service for more than a month, it must be stored in a frost-
free and dry room.
6.1 Prior to decommissioning
Procedure
• Thoroughly clean the truck, see page 104.
• Prevent the truck from rolling away accidentally.
• Apply a thin layer of oil or grease to any non-painted mechanical components.
• Lubricate the truck according to the lubrication diagram, see page 108.
6.2 Restoring the truck to service after decommissioning
WARNING!
Faulty brakes can cause accidents
Test the brakes immediately as soon as the truck has been commissioned.
u
Report any defects immediately to your supervisor.
u
Tag out and decommission a faulty lift truck.
u
Only return the truck to service when you have identified and rectified the fault.
Procedure
• Thoroughly clean the truck.
• Lubricate the truck according to the lubrication diagram, see page 108.
• Start up the truck, see page 52.
110
11.19 en-GB
To Next Page
Loading...
Need help?
General
