4.3 Pushing/Pulling
Z
To avoid abrasion and wear, travelling without load should be with the load handler
raised.
Requirements
– Start up the truck, see page 52.
Procedure
• Release the parking brake by applying the foot-
activated parking brake (8, o) or the travel and
parking brake (1, o).
Using the handle (3) on the tiller (5), the truck can be
pushed or pulled in the required direction.
4.4 Steering
Procedure
• Swing the tiller (5) to the left or right.
Z
In tight bends the tiller extends beyond the truck geometry.
55
11.19 en-GB
To Next Page
Loading...
Need help?
General
