C 2
0600.GB
3 Moving an incapacitated truck (emergency operation)
To move the truck by emergency operation, the electromagnetically applied brake
must be released.
- Remove the motor cover (2).
- Turn the screws (3) in clockwise direction until reaching the stop.
The truck can now be moved.
m
After the truck has been parked at its destination, the screws (3) must be turned again
anti-clockwise by 1½ revolutions. This restores the braking effect.
2
3
C 2
0600.GB
3 Moving an incapacitated truck (emergency operation)
To move the truck by emergency operation, the electromagnetically applied brake
must be released.
- Remove the motor cover (2).
- Turn the screws (3) in clockwise direction until reaching the stop.
The truck can now be moved.
m
After the truck has been parked at its destination, the screws (3) must be turned again
anti-clockwise by 1½ revolutions. This restores the braking effect.
2
3