Jungheinrich EMC 110/B 10 User Manual

G 7
0600.GB
2.4 Moving the platform
- Move the truck with its load lifting device completely underneath the platform.
m
The fastening cam (12) of the platform must be positioned directly above the recess
for the load-bearing wheel on the load lifting device.
- Lift the platform.
f
Before moving the platform, make sure that the fastening cam (12) engages in the
recess for the load-bearing wheel!
- Move the platform to its destination and lower it.
2.5 Safety notes regarding operation with the platform
f
Before using the platform, secure the truck against unauthorised use by a third per-
son. To do so, set the key switch to the vertical position and remove the key.
12
G 7
0600.GB
2.4 Moving the platform
- Move the truck with its load lifting device completely underneath the platform.
m
The fastening cam (12) of the platform must be positioned directly above the recess
for the load-bearing wheel on the load lifting device.
- Lift the platform.
f
Before moving the platform, make sure that the fastening cam (12) engages in the
recess for the load-bearing wheel!
- Move the platform to its destination and lower it.
2.5 Safety notes regarding operation with the platform
f
Before using the platform, secure the truck against unauthorised use by a third per-
son. To do so, set the key switch to the vertical position and remove the key.
12

Jungheinrich EMC 110/B 10 Specifications

General

Brand	Jungheinrich
Model	EMC 110/B 10
Category	Forklifts
Language	English