Jungheinrich EMC 110/B 10 User Manual

G 11
0600.GB
4.2 Technical Data
4.3 Working with the automatic height positioning unit
f
Do not step below a lifted load.
Always wear safety boots when working with the automatic height positioning unit.
- Pick up the loading aid to be used and park the truck in the work area.
- Position the sensor (14) on the side of the mast according to the desired working
height.
- Set the switch below the key switch to the desired position
(„Unloading“ or „Loading“).
Designation Dimension
Working height 800-1930 mm
Range 600 mm
800-1930
14
600
G 11
0600.GB
4.2 Technical Data
4.3 Working with the automatic height positioning unit
f
Do not step below a lifted load.
Always wear safety boots when working with the automatic height positioning unit.
- Pick up the loading aid to be used and park the truck in the work area.
- Position the sensor (14) on the side of the mast according to the desired working
height.
- Set the switch below the key switch to the desired position
(„Unloading“ or „Loading“).
Designation Dimension
Working height 800-1930 mm
Range 600 mm
800-1930
14
600

Jungheinrich EMC 110/B 10 Specifications

General

Brand	Jungheinrich
Model	EMC 110/B 10
Category	Forklifts
Language	English