Jungheinrich EMC 110/B 10 User Manual

E 4
0600.GB
3 Starting up the truck
f
The driver must make sure that nobody is within the danger area of the truck before
the truck is switch on or operated or before a load is lifted.
Checks and operations to be performed before starting daily work
- Check the entire truck (especially the wheels and the load lifting device) for
damage.
Switching on the truck
- Check that the battery plug (8) and the emergency stop plug (9) are plugged.
- Insert the key into the key switch (10) and turn it clockwise until reaching the stop.
A
The battery discharge indicator indicates the remaining capacity of the battery.
- Check the “Horn” button (5) for proper functioning by pressing it.
The truck is now ready for operation.
- Check the braking function of the control shaft (see chapter E, section 4.2).
5
10
8
9
E 4
0600.GB
3 Starting up the truck
f
The driver must make sure that nobody is within the danger area of the truck before
the truck is switch on or operated or before a load is lifted.
Checks and operations to be performed before starting daily work
- Check the entire truck (especially the wheels and the load lifting device) for
damage.
Switching on the truck
- Check that the battery plug (8) and the emergency stop plug (9) are plugged.
- Insert the key into the key switch (10) and turn it clockwise until reaching the stop.
A
The battery discharge indicator indicates the remaining capacity of the battery.
- Check the “Horn” button (5) for proper functioning by pressing it.
The truck is now ready for operation.
- Check the braking function of the control shaft (see chapter E, section 4.2).
5
10
8
9

Jungheinrich EMC 110/B 10 Specifications

General

Brand	Jungheinrich
Model	EMC 110/B 10
Category	Forklifts
Language	English