Jungheinrich EMC 110/B 10 User Manual

G 9
0600.GB
3.4 Moving the platform with rollers
- Move the truck with its load lifting device completely underneath the platform.
m
The fastening cam (13) of the platform must be positioned directly above the recess
for the load-bearing wheel on the load lifting device.
m
Lift the platform.
f
Before moving the platform, make sure that the fastening cam (13) engages in the
recess for the load-bearing wheel!
- Move the platform to its destination and lower it.
3.5 Safety notes regarding operation with the platform
f
Before approaching the load lifting device, secure the truck against unauthorised use
by a third person. To do so, set the key switch to the vertical position and remove the
key.
13
G 9
0600.GB
3.4 Moving the platform with rollers
- Move the truck with its load lifting device completely underneath the platform.
m
The fastening cam (13) of the platform must be positioned directly above the recess
for the load-bearing wheel on the load lifting device.
m
Lift the platform.
f
Before moving the platform, make sure that the fastening cam (13) engages in the
recess for the load-bearing wheel!
- Move the platform to its destination and lower it.
3.5 Safety notes regarding operation with the platform
f
Before approaching the load lifting device, secure the truck against unauthorised use
by a third person. To do so, set the key switch to the vertical position and remove the
key.
13

Jungheinrich EMC 110/B 10 Specifications

General

Brand	Jungheinrich
Model	EMC 110/B 10
Category	Forklifts
Language	English