Juniper ACX2100 - ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping; ACX2000 Hardware and CLI Terminology Mapping

SEE ALSO
Front Panel of an ACX2000 Router | 47
Front Panel of an ACX2100 Router | 48
ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping
IN THIS SECTION
ACX2000 Hardware and CLI Terminology Mapping | 20
ACX2100 Hardware and CLI Terminology Mapping | 22
ACX2000 Hardware and CLI Terminology Mapping
Table 3 on page 20 describes the hardware terms used in ACX2000 router documentation and the
corresponding terms used in the Junos OS command line interface (CLI). Figure 5 on page 22 shows the
port locations of the interfaces.
Table 3: CLI Equivalents of Terms Used in Documentation for ACX2000 Routers
Additional InformationItem in Documentation
Value (as
displayed in
the CLI)
Description (as
displayed in the
CLI)
Hardware
Item (as
displayed
in the CLI)
“Chassis Physical Specifications
for ACX2000 and ACX2100
Routers” on page 72
Router chassis–ACX2000Chassis
Interface Naming Conventions
Used in the Junos OS Operational
Commands
The router does not have
actual FPCs. In this case,
FPC refers to the router
itself.
Value of n is
always 0.
Abbreviated name of
the Flexible PIC
Concentrator (FPC)
FPC (n)
20