Removing and Installing PTX10000 Line Card Components | 337
Installing a PTX10000 Line Card | 338
Removing a PTX10000 Line Card | 341
Installing the PTX10000 Cable Management System | 344
Removing and Installing Transceivers and Fiber Optic Cables | 347
Installing a Transceiver in a PTX10000 Router | 348
Removing a Transceiver from a PTX10000 Router | 350
Disconnecting a Fiber-Optic Cable from a PTX10000 Router | 352
Connecting a Fiber-Optic Cable to a PTX10000 Router | 353
Maintaining Fiber-Optic Cables in a PTX10000 Router | 354
Removing the PTX10008 Router | 355
Powering Off a PTX10000 | 356
Removing a PTX10008 From a 4-Post Rack Using a Mechanical Lift | 358
Manually Removing a PTX10008 from a 4-Post Rack | 360
Troubleshooting Hardware
Restoring Junos OS | 365
Creating an Emergency Boot Device | 365
Performing a Recovery Installation Using an Emergency Boot Device | 368
Alarm Messages | 370
Understanding Alarms | 370
Interface Alarm Messages | 371
Contacting Customer Support and Returning the Chassis or Components
Contacting Customer Support | 375
Returning the PTX10000 Chassis or Components | 375
Returning a PTX10000 Router or Component for Repair or Replacement | 376
Locating the Serial Number on a PTX10000 Router or Component | 377
Listing the Chassis and Component Details Using the CLI | 377
Locating the Chassis Serial Number ID Label on a PTX10008 or a PTX10016 | 379
Locating the Serial Number ID Labels on PTX10000 Power Supplies | 381
Locating the Serial Number ID Labels on PTX10000 Fan Trays and Fan Tray
Controllers | 384
ix
To Next Page
Loading...
