Juniper PTX10008 - Page 8

Connecting the PTX10000 to External Devices | 236
Connecting a PTX10000 to a Network for Out-of-Band Management | 237
Connecting a PTX10000 Router to a Management Console | 237
Configuring a PTX10000 | 239
Maintaining Components
4
PTX10000 Field-Replaceable Units | 245
Removing and Installing PTX10000 Chassis Components | 247
Installing a PTX10000 Routing and Control Board | 247
Removing a PTX10000 Routing and Control Board | 250
Removing and Installing PTX10000 Cooling System Components | 252
Installing a PTX10000 Fan Tray | 252
Removing a PTX10000 Fan Tray | 258
Installing a PTX10000 Fan Tray Controller | 265
Removing a PTX10000 Fan Tray Controller | 267
Removing and Installing PTX10000 Power System Components | 269
How to Remove a JNP10K-PWR-AC Power Supply | 270
How to Install a JNP10K-PWR-AC Power Supply | 274
How to Remove a JNP10K-PWR-AC2 Power Supply | 282
How to Install a JNP10K-PWR-AC2 Power Supply | 285
How to Remove a JNP10K-PWR-DC Power Supply | 292
How to Install a JNP10K-PWR-DC Power Supply | 297
How to Remove a JNP10K-PWR-DC2 Power Supply | 307
How to Install a JNP10K-PWR-DC2 Power Supply | 311
Removing and Installing PTX10000 Switch Fabric Components | 321
Handling and Storing PTX10000 Line Cards, Routing and Control Boards, and SIBs | 321
Holding Line Cards and Control Boards | 322
Holding SIBs | 323
Storing Line Cards, Routing and Control Boards, and SIBs | 325
Installing a PTX10000 Switch Interface Board | 326
Removing a PTX10000 Switch Interface Board | 332
viii