Juniper QFX5200 - QFX5200 Installation Overview

QFX5200 Installaon Overview
IN THIS SECTION
Overview of Installing the QFX5200 | 95
QFX5200 Installaon Safety Guidelines | 96
Overview of Installing the QFX5200
You can mount a QFX5200:
• Flush with the front of a 19-in. four-post rack. Use the standard mounng brackets provided with the
switch for this conguraon.
• (QFX5200-32C and QFX5200-32C-L) Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack.
Use the extension bracket provided in the standard mounng kit for this conguraon. Recessed
mounng is primarily used in enclosed cabinets.
To install and connect a QFX5200:
1. Follow the instrucons in "Unpacking a QFX5200" on page 97.
2. Determine how the switch is to be mounted.
Flush or recessed mounted in a rack or cabinet, see "Mounng a QFX5200 in a Rack or Cabinet" on
page 99.
3. Follow the instrucons in:
a. "Connect the QFX5200 to Earth Ground" on page 109
b. "Connecng AC Power to a QFX5200" on page 112 or "Connecng DC Power to a QFX5200" on
page 115, or "Connecng DC Power to a QFX5200" on page 115
c. "Register Products—Mandatory to Validate SLAs" on page 99
4. Follow the instrucons in "Performing the Inial Soware Conguraon for QFX5200 Switches" on
page 122.
95