To Next Page

To Previous Page

Table 27: QFX5200 Switch Environmental Tolerances

(Connued)

Descripon Model Tolerance

Temperature QFX5200-32C and

QFX5200-32C-L

• Normal operaon ensured in temperature range

of 32° F through 104° F (0° C through 40° C)

• Nonoperang storage temperature in shipping

container: –40° F through 158° F (–40° C

through 70° C)

QFX5200-48Y

• Normal operaon ensured in temperature range

of 32° F through 113° F (0° C through 45° C) for

AFO models, 32° F through 104° F (0° C

through 40° C) for AFI models

• Nonoperang storage temperature in shipping

container: –40° F through 158° F (–40° C

through 70° C) for both AFO and AFI

Seismic QFX5200 all models Designed to comply with Zone 4 earthquake

requirements per NEBS GR-63-CORE, Issue 3.

NOTE: Install QFX Series devices only in restricted areas, such as dedicated equipment rooms

and equipment closets, in accordance with Arcles 110-16, 110-17, and 110-18 of the Naonal

Electrical Code, ANSI/NFPA 70.

General Site Guidelines

Ecient device operaon requires proper site planning and maintenance and proper layout of the

equipment, rack or cabinet, and wiring closet.

To plan and create an acceptable operang environment for your device and prevent environmentally

caused equipment failures:

• Keep the area around the chassis free from dust and conducve material, such as metal akes.

Juniper QFX5200 User Manual

Questions and Answers: