Juniper QFX5200 User Manual

Table 18: AC Power Specicaons for a QFX5200 (Connued)
Item Specicaon
QFX5200-48Y 430 W
QFX5200 Power Cord Specicaons
Detachable AC power cords are shipped with the chassis, if you include them as part of your order. The
coupler is type C13 as described by Internaonal Electrotechnical Commission (IEC) standard 60320.
The plug end of the power cord ts into the power source outlet that is standard for your geographical
locaon.
NOTE: In North America, AC power cords must not exceed 14.75 feet (approximately 4.5 meters)
in length, to comply with Naonal Electrical Code (NEC) Secons 400-8 (NFPA 75, 5-2.2) and
210-52, and Canadian Electrical Code (CEC) Secon 4-010(3). The cords that can be ordered for
the QFX Series switches are in compliance.
Table 19 on page 43 lists AC power cord specicaons provided for each country or region.
Table 19: AC Power Cord
Specicaons
Country/
Region
Electrical
Specicaons
Plug Standards Shipped
Juniper
Model
Number
Spare Juniper
Model Number
Graphic
Australia 250 VAC, 10 A, 50
Hz
AS/NZ 3109-1996 CG_CBL-
C13-06-AU
CBL-EX-PWR-
C13-AU
Brazil 250 VAC, 10 A,
50 Hz
NBR 14136 Type
BR/3
CBL-PWR-
C15M-
HITEMP-BR
43

Juniper QFX5200 Specifications

General

Brand	Juniper
Model	QFX5200
Category	Switch
Language	English