Juniper QFX5200 User Manual

on a chassis, you must change out all the fans and power supplies at one me to use
the new direcon.
To supply sucient power, terminate the DC input wiring on a facility DC source that is capable of
supplying a minimum of 7 A at –48 VDC.
To avoid electrical injury, carefully follow instrucons in "Connecng AC Power to a QFX5200" on page
112.
QFX5200 AC Power Specicaons
Table 18 on page 42 describes the AC power specicaons for a QFX5200.
Table 18: AC Power Specicaons for a QFX5200
Item Specicaon
AC input voltage Operang range:
• 100 / 240 VAC
AC input line frequency 50–60 Hz
AC input current rang QFX5200-32C and QFX5200-32C-L 4.5 A at 100–120 VAC
2.0 A at 200–240 VAC
QFX5200-48Y 7.8 A at 100–120 VAC
3.8 A at 200-240 VAC
Typical power consumpon QFX5200-32C and QFX5200-32C-L 380 W
QFX5200-48Y 382 W
Maximum power consumpon QFX5200-32C and QFX5200-32C-L 480 W
42

Juniper QFX5200 Specifications

General

Brand	Juniper
Model	QFX5200
Category	Switch
Language	English