Juniper QFX5200 - Page 5

QFX5200 Installaon Safety Guidelines | 96
Unpacking and Mounng the QFX5200 | 96
Unpacking a QFX5200 | 97
Register Products—Mandatory to Validate SLAs | 99
Mounng a QFX5200 in a Rack or Cabinet | 99
Before You Begin Rack Installaon | 99
Four Post Installaon Procedure for QFX5200-32C or QFX5200-32C-L | 101
Four Post Installaon Procedure for QFX5200-48Y | 102
Connecng the QFX5200 to External Devices | 106
Connect a Device to a Network for Out-of-Band Management | 106
Connect a Device to a Management Console Using an RJ-45 Connector | 107
Connecng the QFX5200 to Power | 109
Connect the QFX5200 to Earth Ground | 109
Alternate Method to Ground QFX5200-32C-DC Systems | 111
Connecng AC Power to a QFX5200 | 112
Connecng DC Power to a QFX5200 | 115
Before You Begin | 116
Connecng DC Power to a QFX5200-32C-DC | 117
Connecng DC Power to a QFX5200-48Y | 120
Performing the Inial Soware Conguraon for QFX5200 Switches | 122
4
Maintaining Components
Maintaining QFX5200 Cooling System | 127
Removing a Fan Module from a QFX5200 | 127
Installing a Fan Module in a QFX5200 | 129
Maintaining QFX5200 Power System | 131
Removing a Power Supply from a QFX5200 | 131
Installing a Power Supply in a QFX5200 | 133
Maintaining Transceivers and Fiber Opc Cables on QFX5200 | 135
v