Juniper SRX220

An OK response verifies that the modem can communicate successfully with the COM
port on the PC or laptop.
6. Dial the modem that is connected to the console port on the services gateway by
entering ATDT remote-modem-number. For example, if the number of the modem
connected to the console port on the services gateway is 0013033033030, enter ATDT
0013033033030.
The services gateway login prompt appears.
7. Log in as the user root. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
• Connecting the Modem at the SRX220 Services Gateway End on page 105
• Connecting the Modem to the Console Port on the SRX220 Services Gateway on
page 106
• SRX220 Services Gateway Software Configuration Overview on page 109
Copyright © 2012, Juniper Networks, Inc.108
SRX220 Services Gateway Hardware