Juniper SRX220

Table 17: Power Supply Electrical Specifications for the SRX220 Services
Gateway
SpecificationPower Requirement
100 to 240 VACAC input voltage
47 to 63 HzAC input line frequency
1.5 A maximum for SRX220H model
2.5 A maximum for SRX220H-POE model
AC system current rating
WARNING: The AC power cord for the services gateway is intended for use
with the device only and not for any other use.
Related
Documentation
• SRX220 Services Gateway Power Supply on page 17
• SRX220 Services Gateway Site Electrical Wiring Guidelines on page 35
• Site Preparation Checklist for the SRX220 Services Gateway on page 27
• SRX220 Services Gateway Grounding Specifications on page 37
• Interface Cable and Wire Specifications for the SRX220 Services Gateway on page 39
33Copyright © 2012, Juniper Networks, Inc.
Chapter 5: Site Preparation