EasyManuals Logo

Juniper SRX5400 Getting Started Guide

Juniper SRX5400
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SRX5400 Services Gateway Getting Started
Guide
October 2017
Part Number: 530-082619
Revision 01
This document describes how to install the SRX5400 Services Gateway.
Contents
About This Guide | 3
Step 1: Prepare the Site for SRX5400 Services Gateway Installation | 4
Rack-Mounting Requirements | 5
Tools Required to Unpack and Prepare the SRX5400 Services Gateway for Installation | 6
Step 2: Install the Mounting Hardware in a Four-Post Rack or Cabinet or an Open-Frame Rack | 6
Step 3: Install the Services Gateway | 9
Remove Components | 10
Install the Services Gateway Using a Lift | 11
Install the Services Gateway Without a Mechanical Lift | 13
Reinstall Components | 14
Step 4: Connect the Grounding Cable | 14
Step 5: Connect External Devices and Network Cables | 16
Connect to a Network for Out-of-Band Management | 16
Connect a Management Console | 16
Connect the Network Cables | 17
Step 6: Connect Power Cables | 18
Connect Power to an AC-Powered Services Gateway | 18
Connect Power to a DC-Powered Services Gateway | 20
Step 7: Perform the Initial Software Configuration | 23
Enter Configuration Mode | 23
Configure User Accounts and Passwords | 24
1

Other manuals for Juniper SRX5400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper SRX5400 and is the answer not in the manual?

Juniper SRX5400 Specifications

General IconGeneral
ModelSRX5400
New Sessions per Second200, 000
Operating SystemJunos OS
PlatformSRX Series
InterfacesMultiple 1G, 10G, and 40G interfaces
Power SupplyDual AC or DC power supplies

Related product manuals