SRX5400 Services Gateway Getting Started
Guide
October 2017
Part Number: 530-082619
Revision 01
This document describes how to install the SRX5400 Services Gateway.
Contents
About This Guide | 3
Step 1: Prepare the Site for SRX5400 Services Gateway Installation | 4
Rack-Mounting Requirements | 5
Tools Required to Unpack and Prepare the SRX5400 Services Gateway for Installation | 6
Step 2: Install the Mounting Hardware in a Four-Post Rack or Cabinet or an Open-Frame Rack | 6
Step 3: Install the Services Gateway | 9
Remove Components | 10
Install the Services Gateway Using a Lift | 11
Install the Services Gateway Without a Mechanical Lift | 13
Reinstall Components | 14
Step 4: Connect the Grounding Cable | 14
Step 5: Connect External Devices and Network Cables | 16
Connect to a Network for Out-of-Band Management | 16
Connect a Management Console | 16
Connect the Network Cables | 17
Step 6: Connect Power Cables | 18
Connect Power to an AC-Powered Services Gateway | 18
Connect Power to a DC-Powered Services Gateway | 20
Step 7: Perform the Initial Software Configuration | 23
Enter Configuration Mode | 23
Configure User Accounts and Passwords | 24
1
To Next Page
Need help?
General
