Juniper SRX5400 - Page 28

security {
zones {
security-zone trust {
interfaces {
ge-2/1/5.0;
}
}
security-zone untrust {
interfaces {
ge-2/0/0.0;
}
}
}
policies {
from-zone trust to-zone untrust {
policy bob {
match {
source-address any;
destination-address any;
application any;
}
then {
permit;
}
}
}
}
}
3. Commit the configuration to activate it on the services gateway.
[edit]
admin@# commit
4. Optionally, configure additional properties by adding the necessary configuration statements. Then
commit the changes to activate them on the services gateway.
[edit]
admin@# commit
28