Juniper SSR130 - Add the Network

Rack Requirements for SSR130 | 24
Cable Specifications and Pinouts for SSR130 | 25
Console Port Connector Pinouts for SSR130 | 26
Pluggable Transceivers Supported on SSR130 | 26
Initial Installation and Configuration
3
Unpack and Mount an SSR130 | 28
Unpack an SSR130 | 28
Verify Parts Received with the SSR130 | 29
Register Products—Mandatory to Validate SLAs | 30
Mount an SSR130 on a Desk or Other Level Surface | 30
Mount an SSR130 on a Two-Post Rack | 31
Installing Antennas for the SSR130 Appliances that Support LTE | 33
Inserting the SIM Card | 34
Connect the SSR130 to Power | 35
Connect Earth Ground to SSR130 | 35
Connect Power to SSR130 | 37
Power Off the SSR130 | 38
Connect SSR130 to External Devices | 39
Connect SSR130 to a Management Console | 39
Configuring SSR Software on the SSR130 | 40
Configure the SSR130 Appliance from the SSR Conductor | 41
QuickStart From the OTP ISO | 44
Contacting Customer Support and Returning the Chassis or Components
4
Contacting Customer Support and Returning the Chassis or Components | 51
How to Return a Hardware Component to Juniper Networks, Inc. | 51
Locating the Chassis Serial Number | 52
Contact Customer Support to Obtain Return Material Authorization | 52
Guidelines for Packing Hardware Components for Shipment | 53
iv