JUNTTAN PM 20L - Warning Signs

JUNTTAN Safety section
11
WARNING
h
MOVING
COUNTERWEIGHT
WARNING
KEEP CLEAR
OF PILE DRIVER
WHEN IN OPERATION
WARNING
HOT SURFACE
WARNING
STAY CLEAR OF
ROTATING PARTS
WARNING
STAY CLEAR OF
STABILIZER CYLINDER
WARNING
DO NOT GO UNDER
THE HAMMER OR ANY
PART OF IT AND STAY
OUT OF THE WORKING
RADIUS DURING
OPERATION.
Read all safety instructions
and operating instructions
b
efore start using o
r
servicing this machine.
Emergency exit Lifting point
CAUTION
Pressurized vessel.
Discharge prior
to disassembly.
Use only nitrogen
GENERAL INFORMATION
DANGER h
IT IS STRICTLY FORBIDDEN
TO WORK OR STAND
UNDER HAMMER OR ANY
ROPE SUSPENDED LOAD
2.7 WARNING SIGNS
There are several warning signs on
this machine. Please read all warning
signs. Keep signs clean and replace
them if the words cannot be read.