JUNTTAN PM 20L - Weight (Working); Transport Weight; Fluid and Lubricants Capacities

JUNTTAN Specifications section
19
3.11 WEIGHT (WORKING)
Base machine with leader: 39 000 kg
(net including full fuel and oil tanks, etc.)
Counterweight: 7 500 kg
Rotary head (JD 1.5): 500 kg
Hammer (HHK 3AL): 6 400 kg
Hammer (HHK 4AL): 7 700 kg
Base machine with counterweight and hammer 3AL: 52 900 kg
Base machine with counterweight and hammer 4AL: 54 200 kg
3.11.1 TRANSPORT WEIGHT
Approximate weight with hammer 3AL: 52 900 kg
Approximate weight with hammer 4AL: 54 200 kg
3.12 FLUID AND LUBRICANTS CAPACITIES
Location Type, factory filled Standards Capacity
Engine oil Neste turbo LXE
15W-40 mineral
API CH-4/SJ, ACEA E5,
E3, B3, CES 20071
17 litres
Engine coolant Neste coolant
50% mixture
BS6580:1992, Afnor R15-
601, ASTM D 3306
35 litres
Hydraulic oil Neste hydraulic 46
mineral, VG46
ISO 3448, DIN 51524
HVLP
600 litres
Fuel Diesel ASTM No. 2 D above 0 ºC
No. 1 D below 0 ºC
600 litres
Swing drive
planetary
Neste hypoidi LF
SAE 80W(77W)-90
API GL-5, MIL-L-2105 D 10 litres
Track drive
planetary
Neste hypoidi LF
SAE 80W(77W)-90
API GL-5, MIL-L-2105 D 5.5 litres
Minimum purity of grade of hydraulic oil: 20/18/15 -ISO-4406 (c)
n ATTENTION
Recommended operating temperature is -20°C - +40°C.