EasyManua.ls Logo

JUNTTAN PM 20L - Page 98

JUNTTAN PM 20L
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
JUNTTAN Routine service section
98
ENGINE MAINTENANCE SCHEDULE
General information
Perfom maintenance at whichever interval occurs first. At each scheduled maintenance
interval, perform all previous maintenance checks that are due for scheduled
maintenance.
Daily or Refueling - Maintenance check
3
Air tank and reservoirs - drain
Crankcase breather tube - inspect
Engine coolant level - check/correct
Fuel-water separator - drain
Every 250 Hours or 3 Months - Maintenance check
3
Air cleaner restriction - check/correct
Air compressor mounting hardware - check/correct
Charge air cooler - check/correct
Charge air piping - check/correct
Radiator hoses - check
Air intake piping - inspect
Cooling fan - inspect
Coolant level - check/correct
Drive belts - check/correct
Every 500 Hours or 6 Months - Maintenance check
1,2,3
Engine coolant antifreeze - check
Fuel filter, spin-on-type - replace
Lubricating oil and filters - change
Every 1000 Hours or 1 Year - Maintenance check
3
Cooling fan belt tensioner - check/correct
Fan hub, belt-driven - check/correct
Every 2000 Hours or 2 Years - Maintenance check
2,3
Air compressor discharge line - check/correct
Cooling system – drain/flush/fill
Vibration damper, rubber - check
Vibration damper, viscous - check
Every 5000 Hours or 4 Years - Maintenance check
3
Overhead set - adjust

Table of Contents