JVC A-X3 - Listening to Records; Listening to Tapes

FAT APE
IJsonrton
@® REC
4
LISTENING TO RECORDS
1.
Wr
NOOO
Connect
a
turntable
to
the
PHONO
terminals
on
the
rear
panel.
Be
sure
to
connect
the
channels
correctly.
. Press the POWER switch in (— ).
. Press the PHONO switch in (-=) and make sure that the
TAPE MONITOR indicator does not light.
.
Select
the
speaker
system
with
the
SPEAKERS
switches,
.
Set
the
MC/MM
select
switch
as
required.
. Operate the turntable according to its instruction manual.
. Adjust the VOLUME, BALANCE and TONE.
LISTENING TO TAPES
To listen to the tape deck connected to TAPE-1 terminals or
DIN socket (Not provided on sets for USA and Canada.)
1.
2.
3. Press the TAPE MONITOR switch in (-=) so that the
7
Connect a tape deck to the TAPE-1 PLAY terminals or the
DIN socket.
Press the POWER switch in (-— ).
TAPE MONITOR indicator lights.
4. Select the speaker system with the SPEAKERS switches.
5.
6. Operate the tape deck for playback according to its instruc-
Leave the TAPE switch in its “out” position ( mm ).
tion manual.
Adjust the playback sound controls.
To listen to the tape deck connected to TAPE-2 terminals
1.
2:
3.
4.
Connect a tape deck to the TAPE-2 PLAY terminals.
Press the POWER switch in (=).
Press the TAPE MONITOR switch in ( = }.
Press the TAPE switch in (-=).
iT