JVC CA-S200 - Listeming to a Compact Disc; Basics of Using the CD Player; To: Playa CD Sc Cai.tehecstn Aa Ttecaieeteoetoised; How to Find the Track or a Particular Point YOU Want

COMPUTPLA
Compact Disc Play
How to use the CD
player: from the
most basic to
advanced
How to find a track
Using the Remote to
find a track
With programming,
you can play back
tracks in any order
RANDOM
Program with the
Remote
Listening to a Compact Disc
The quickest way to start a CD is with the One Touch Operation:
QO Press &/t on the CA-S200 or ® on the Remote.
¢ IfaCDis already loaded, the Unit automatically turns on and starts to play it from
track 1.
If no CD is loaded, the Unit automatically turns on and the CD tray opens. This
is exactly the same as what happens if you press & instead of >/I.
Basics of Using the CD Player
Here are the basic things you need to know to play a CD and locate the different selections on it.
Each selection is called a track, so when we are talking about locating a track, we are also talking
about how you find a certain song or performance.
To Play a CD
1. Press &.
2. Puta CD, printed side up, into the tray.
3. If you want to listen to the CD now, press C/I (or ® on the Remote).
The display shows the track being played and the length of time since it started.
Tostop the CD, press g/CLEAR (or ™ on the Remote). When you start again, the CD begins with
track 1.
To pause the play, press >/I while the CD is playing so when you press >/H again (or on
the Remote) the CD starts just where you left off.
To remove a CD, press &, take the CD out, and press 4 again to close the tray.
Q Keep the tray closed except during loading and unloading to protect the mechanism from dust
and damage.
How to Find the Track or a Particular Point You Want
Each time you press briefly and release <¢<4 or PP (<4 or PI on the Remote) the track changes
by one.
Q Press and release ® (or B&1 on the Remote) to go ahead one track at a time.
Q Press and release kd (or <4 on the Remote) to go back one track at a time.
Q Holding down kd or BP will fast forward or fast reverse the CD so you can quickly find
the
particular
part
of
a
track
you
want
to
listen
to.
Fast
forward
and
fast
reverse
are
only
possible by using the buttons on the Unit when the CD is playing.
Q Holding down ké<¢ or Bi on the Remote allows you to change the tracks continuously.
(By using the buttons on the Unit, it is only possible when the CD is not playing.)
Locating a Track with the Remote
Using the 10 key pad on the Remote allows you to go directly to the beginning of any track.
1. Press CD 10 KEY.
2. Enter the number of the track you want using the 10 key pad. The selected track will start
to play.
Example:
for
track
5,
press
5.
For
track
15,
press
+10
then
5.
For
track
20,
press
+10,
then 10.
Programming the Playing Order of the Tracks
In
addition
to
the
high
quality
sound
which
makes
the
CD
such
a
good
way
to
listen
to
music,
you
can change the order in which the tracks play.
Random Play
The tracks will play in no special order when you use this play mode.
Before starting a CD, press RANDOM on the CA-S200.
When all of the tracks have been played, the CD shuts off.
Q Press REPEAT before or during random play to instruct the CA-S200 to continue with a
different random track selection after the last selection is played.
To cancel random play, press @/CLEAR (or il on the Remote).
Programmed Play
You can arrange the tracks to play in any order you like with the Program function. The Remote
is very useful for this because you can select tracks by number with the 10 key pad. See “How
to
Use
the
Remote
Control”
on
page
19,
if
you
need
more
information
about
its
use.
You
can
also
use the main Unit.
Page 10