Function
Sync Out
For selecting the type of signal to output from Sync Out.
Setting Description
Input (Positive) Outputs a signal that is synchronized with the vertical sync signal of the input video
signal.
Input (Negative) Outputs a signal with reversed polarity that is synchronized with the vertical sync
signal of the input video signal.
Low Fixes the output at Low.
High Fixes the output at High.
FEDSC Outputs a signal that is synchronized with the polarity information included in the
FEDSC packet. Outputs a Low when there is no FEDSC packet.
Off Timer
For setting the duration before the power turns off automatically when the projector is not operated.
0
Setting values: “Off”, “1 Hour”, “2 Hours”, “3 Hours” and “4 Hours”
* The setting will be retained even after the Off Timer operation has completed.
Network
For specifying the settings for external control from a PC or smartphone.
Setting Description
DHCP Client On Obtains the IP address automatically from the DHCP server inside the connected
network.
Off For configuring the network settings manually.
IP Address For configuring the IP address.
Subnet Mask For configuring the subnet mask.
Default Gateway For configuring the default gateway.
MAC Address Displays the MAC address of the unit.
Set Applies the network settings.
Glossary of Network Terminology
DHCP :
Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
IP Address : Numeric characters for identifying the device that is connected to the network.
Subnet Mask : Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
Default Gateway : Server for communicating beyond the network that is divided by the subnet mask.
MAC Address : Abbreviation for Media Access Control address. This is a number that is unique to each
network adapter. Each of the network adapters is assigned with a unique MAC address.
43
Adjust/Set
To Next Page
Loading...
Need help?
General
