Specifications
Product Name D-ILA Projector
Model Name DLA-VS3000G
Display Panel/Size D-ILA device *1, 2
0.69” 4K D-ILA (4096 x 2160 pixels) x 3
Light Source Blu-Escent Laser / Phosphor
Screen Size Approx. 60” to 300” (Aspect ratio of 4096 x 2160)
Brightness 1600 lm
Projection Distance Refer to P. 60.
Input Compatibility Signal Refer to P. 62.
Display Resolution 4096 x 2160 pixels
Input Terminal DisplayPort Input DisplayPort 1.2a, 20-pin (male) x 2
Output Terminal SYNC OUT Mini jack, TTL output x 1 *3
Control Terminal RS-232C Terminal Single, D-sub 9-pin (male) x 1 *4
Remote Terminal Stereo mini jack (remote control) x 1
LAN Terminal Single, RJ45 jack, 10BASE-T/100BASE-TX x 1
Service
Terminal
SERVICE Single (USB Type A) x 1 *5
Power Requirements AC 100 V to 240 V, 50 Hz/60 Hz
Power Consumption 440 W (during standby: 1.5 W *6)
Operation Environment Temperature: 5°C to 35°C; humidity: 20% to 80%; storage
temperature: -10°C to 60°C
Installation Height Below 6,561 ft (2,000 m)
Dimensions (Width x Height x Depth)
500 mm x 234 mm x 518 mm (including feet)
Mass 22.5 kg
Accessories Refer to P. 13.
*1 D-ILA is the abbreviation for Direct Drive Image Light Amplifier.
*2 D-ILA devices
are manufactured using extremely high-precision technology with a pixel effectiveness of 99.99%.
Only 0.01% or less of the pixels are either missing or would remain permanently lit.
*3 For synchronizing with other equipment.
*4 For external control.
*5 Exclusively for firmware update.
*6 The power consumption of this product during networked standby when all wired network ports are connected
is 1.5 W.
0
Design and specifications are subject to change without prior notice.
0
Please
note
that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order
to aid comprehension. Images may differ from the actual product.
59
Others
To Next Page
Loading...
