JVC D-ILA DLA-VS3000G - Indicator Lights and Warnings

Indicator Display on the Main Unit
Meaning of the front panel indicators
The indicator appears blinking.
The indicator is solid.
Operation mode display
Displays using the different colors and solid/blinking light of the indicator on the projector unit.
LIGHT
STANDBY/ON
WARNING LIGHT
STANDBY/ON
WARNING
LIGHT
STANDBY/ON
WARNING LIGHT
STANDBY/ON
WARNING
DB
TAN
BY/O
DB
TAN
BY/O
D
D
Y/O
A
ANDBY/O
In the Cool-down mode
“STANDBY/ON” blinking (red)
When LD block is starting up
“STANDBY/ON” lights up (green)
In standby state
“STANDBY/ON” lights up (red)
“STANDBY/ON” blinking (green)
・
・
・
・
* “LIGHT” indicator does not blinking
when “LED Indication” is set to “Off”.
When the video image is
temporarily hidden (HIDE is on) *
Estimated timing for laser light source replacement
Displays using the solid/blinking light of the “LIGHT” indicator.
* “LIGHT” indicator does not light up when “LED Indication” is set to “Off”.
0
Lights up when the “LD Current” gauge reaches 95 and above. (When the “Auto
Intensity” function is “On”.)
LIGHT
STANDBY/ON
WARNING
GH
LIG
HT
“LIGHT” lights up (orange)
65
Others