1-10 (No.HC034<Rev.001>)
(4) Remove the four screws (S1) attaching the rear plate.
Fig.25
(5) Remove the four screws (S7) attaching the battery bracket.
Fig.26
(6) Remove the four screws (S6) attaching the GENTC board.
Fig.27
(7) Disconnect the wires from the connectors CN58
, CN78,
CN59
, CN32, CN67, CN56, CN92, CN69, CN57 and J1 on
the GENTC board.
Fig.28
(S1)
(S1)
(S1)
Rear plate
(S7)
(S7)
Battery bracket
(S6)
(S6)
CN78
CN58
CN59
GENTC
Board
(S6) (S6)
CN57
CN69
CN92
J1
CN32
GENTC Board
CN67
CN56
To Next Page
Loading...
