Masterpage:Right-NoTitle0
EN
31
Filename [SR-VS30E_1a-EN.fm]
Page 31 February 1, 2002 3:34 pm
Basic Recording
(DV deck)
A
Load a cassette.
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
● The recorder’s power comes on automatically.
B
Select the DV deck.
Press
DV
.
● The DV button lights on the recorder.
C
Choose a programme.
Press
PR +/–
or the
number keys
. Or push the
JOG
dial
and turn it to the left or right to select the channel you
wish to record.
D
Set the tape speed.
Press
SP/LP
(
p
). Check the SP/LP indicator on the
recorder’s front display panel to confirm the selected tape
speed.
E
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the recorder.
● The DV recording indicator lights on the recorder.
F
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
● You can select channel during the Record Pause mode.
G
Stop recording.
Press
8
. Then press to remove the cassette.
● The DV recording indicator turns off.
NOTES:
●
It is not possible to record a TV programme on both the VHS
deck and the DV deck simultaneously. However, it is possible
to record simultaneously from the same external input. Set the
input mode to “L-1”, “L-2” or “F-1” depending on the
connectors being used. (
墌
pg. 49, “Simultaneous Dubbing”)
●
When you record a tape on the DV deck with the recording
speed set to “LP”, it is recommended to play back that tape
back on this DV deck. Digital video recorder from other
manufacturers may not be able to play back the tape properly.
Turn on the TV and select the AV mode.
123
456
789
1
2
1
2
3
0
3
4
4
1
32
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded (
墌
pg. 69).
SR-VS30E_1-EN.book Page 31 Friday, February 1, 2002 3:35 PM
To Next Page
Loading...
Need help?
General
