JVC SR-VS30E - Clock Display

Masterpage:Right-index
EN
7
Filename [SR-VS30E_1-EN.fm]
Page 7 February 19, 2002 4:04 pm
ON-SCREEN DISPLAY (for VHS deck)
When “O.S.D.” is set to “ON” (
墌
pg. 69), various
operational indicators appear on the TV screen.
A
Operation Mode Indicators
B
Tape Speed SP/LP/EP
* EP is for NTSC playback only.
C
Tape Direction
D
Counter Display
E
Tape Remaining Time Indicator
墌
pg. 27
F
Audio Mode Display
墌
pg. 25
G
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3
or
5
from the Stop mode
or perform an Index Search
(
墌
pg. 23). The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
H
Type of Broadcast
墌
pg. 28
I
VHS Indicator
J
Current Day/Month/Year
K
Clock Display
L
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
墌
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(DV
]
VHS)
墌
pg. 45
M
Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
N
“Cassette Loaded” Mark
Beginning End
ON-SCREEN DISPLAY (for DV deck)
When “O.S.D.” is set to “ON” (
墌
pg. 69), various
operational indicators appear on the TV screen.
A
Operation Mode Indicators
B
Tape Speed SP/LP
C
Sound Mode Display
墌
pg. 73
D
Time Code Display
墌
pg. 35, 73
E
Audio Mode Display
墌
pg. 33
F
Type of Broadcast
墌
pg. 35
G
DV Indicator
H
Current Day/Month/Year
I
Clock Display
J
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1 or SAT*)
* When “L-2 SELECT” is set to “SAT” (
墌
pg. 53), “SAT” appears
instead of “L-2”.
Dubbing Direction Indicators
(VHS
]
DV)
墌
pg. 44
K
Timer Warning Display
A warning appears on the TV screen to tell you that the timer-
recording is to start in 5 minutes if you’re not in the Timer
mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
ERROR Indicator*
* ERROR indicator appears when you start dubbing a tape with a
copy protection signals or when Audio Dubbing or Insert Editing is
not possible depending on the condition.
L
“Cassette Loaded” Mark
SR-VS30E_1-EN.fm Page 7 Tuesday, February 19, 2002 4:04 PM