JVC SR-W320U User Manual

7 PLAYBACK
7 PLAYBACK
Adjustment of the Playback Picture
AVE sr var00 it vision vineo casserre RECORDER
eye es
rwen_suneace "We atm 1 80
To correct distortion of the picture When there is too much noise in the picture
1 Set the S-VHS TBC switch to ON. 3 Press the AUTO TRACKING button to light the AT
@ With this switch set to ON, the picture may not lamp. The noise associated with the tape recorded
be clearly visible, depending on the signal on another machine is automatically minimized.
recorded on the tape. In that case, the picture @ This facility does not work with the W-VHS tape
may be better by setting the switch to OFF. in use.
@ When playing back a W-VHS tape, TBC for W-
VHS works regardless of the switch position.
How to select the video quality matching the tape
in use
2 Select the type of video quality with the Al
AUTO or EDIT button.
AL AUTO | Standard
EDIT For dubbing
Front panel display window.
1: 23:46
Ai AUTO L1 SP
Adjustment of the Playback Picture -
When nolse comes up during still picture/slow
picture playback
4 a. Set to siow playback.
b. Adjust with the TRACKING -/+ button.
@ This facility does not work with the W-VHS
tape in use.
@ Tracking adjustment may not be quite
successful when playing back the tape with a
poor recording quality.
To select your desired picture tone
5 Adjust the picture with PICTURE adjust knob.
Soft: Soft-tone picture with noise less
outstanding
Sharp: Sharp, clear-cut picture
@ Usually set to the center.
@ This facility does not work with the W-VHS tape
in use.
@ This facility does not work when the EDIT botton
is set.
31

JVC SR-W320U Specifications

General

Brand	JVC
Model	SR-W320U
Category	Cassette Player
Language	English