JVC SR-W320U User Manual

8 TAPE DUBBING
When Playing Back on a Video Move and Recording on SR-W320U
S output connector
AV output connectors
IN/OUT SELECT
SR-W320U (as a recording machine)
1 Call up" EDIT" on front panel display window with
the EDIT button.
* This facility does not work for the W-VHS tape in
use.
2 Set the IN/ OUT SELECT switch to IN.
3 Select L3 with the INPUT SELECT switch.
4 Press the REC button while pressing the PAUSE
button to bring recording to a pause.
Video movie (as a playback machine)
5 Put the video movie to a still playback mode at a
section you want to dub.
6 Press the EDIT button.
SR-W320U (as a recording machine)
7 The machine starts recording.
34
Video movie (as a playback machine)
8 Press the PAUSE button at a section where you
want to stop.
SR-W320U (as a recording machine)
9 Recording is brought to a pause.
Video movie (as a playback machine)
10When resuming recording, press the EDIT button.
SWR-320U (as a recording machine)
11 Recording is re-started.
Video movie (as a playback machine)
12When finishing, press the STOP button.
SR-W320U (as a recording machine)
13The machine is brought to a pause.
14Finish with the STOP button.
15Press the Ai AUTO button and call back the
VIDEO STATUS. display.
9 RS-232C INTERFACE
This chapter Is dedicated to the user who intends to program for controlling the SR-W320U through the RS-232C.
JVC BASIC TABLE List of commands
1 Data “1”
p rreny | Pe lemon] oT TT TT
we TABLE1
We TABLE?
|__[etivesr_|
F-STILL WL
FIELD
ioe
Few
STEP
| five | |
CTABLET
SHUTTLE Srarus
Data7- SATUS TIMER JVC TABLE!
SENS MODE seL | OFF
[cas Socal A a ee ee
CURRENT
CTL SENSE
PLAY
REQUEST
en Cp bila
a FR Fa OR Oc a (ee
F
RIELD
Feo
ISTEP
2 a OS a ck ee ee od ee ee
Note: Do not use any command other than listed above.
a
35

JVC SR-W320U Specifications

General

Brand	JVC
Model	SR-W320U
Category	Cassette Player
Language	English