JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 195
8.2 Commisioning
Press the finish button, and the MLC master is added.
8.2.6.4 Add JVL motor with FSP Drive profile to IndraWorks project
In the “Library” section of IndraWorks select “Periphery” and “Sercos”. Then find the
“MAC00-ES-FSPDrive” if using a MAC servo motor, or the “MIS/MILxxxxxxES-FSP
-
Drive” if using a MIS/MIL stepper motor. This is dragged and dropped on the “Sercos” in
the “Project explorer” like shown below.
To Next Page
Loading...