JVL MAC00-EC41 - Implementation Guidelines

JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 99
4.5 Implementation guidelines
4.5.1 Introduction
The following chapters describe the typical usage of the JVL Motor and which registers
to use in the different applications.
The chapter should be considered as a general guideline to get started with the
EthernetIP integration of the JVL Motor.
IMPORTANT!: Please notice that the motor will be active and may start
moving when the mode register (reg. 2) is set to anything than 0 (passive
mode). The MAC400, 800, 1500 and 4500 will require AC supply in order
to be active.
!