JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors 29
2.4 Cable accessories
2.4.5 Drawing RS232-M12-1-5-8
Cable that connects the RS232 from M12 to DSUB connectors.
2.4.6 Drawing and description of PA0190
Junction box that splits the connects the signals in the MAC00-Ex41 “I/O” connector
into 4 individual connectors giving an easy and more flexible installation.
Usage hints: The LED's will only work with MIS/MIL or MAC motors where the OUT+
and IO- is supplied from the Ethernet module. See also the I/O description for the mod
-
ule.
If a cable is connected to the “BYPASS” then the Communication pins and GND must be
properly connected to valid signals (pins 2,15,17). AND “COM” must not be used. In
other words use EITHER the “BYPASS” OR the “COM” connector. Not both.
RS232-M12-1-5-8
Interface cable
M12 to DSUB
Date: 27-9-06
JVL Industri Elektronik A/S
Blokken 42 • DK-3460 Birkerød
Tel: +45 4582 4440
Fax: +45 4582 5550
Version - 1.1
Approved by:
BVJ - 1.1
Drawn by:
JVJ
LT0082-11
J1
Cable
J1
Pin no.
DSUB Connector.
Female 9pin.
1
Brown
Green 3
2
5
Housing
White
Blue
Red
Pink
Yellow
Grey
J1
J2
The wires White, Grey, Pink, Blue and Red
are not connected and must be insulated
Pin 1, 4, 6, 7, 8, 9 must be left open
2
3
4
5
6
7
8
Screen
Pin no.Color
J2
J2
Finger screws (2 pcs)
RS232 communication cable for MAC expansion modules
5 metre
Cable, Black PVC, UL 24 AWG, 8 core screened.
M12, 8 pin male connector
Max.
15.6mm
1
2
3
4
5
6
7
8
9
Not connected
Ø6±0.2mm
36.0mm
[1.42 inch]
54.0mm
[2.126 inch]
0
5.0mm
[0.197inch]
= Mounting holes
77.0mm
[3.031inch]
112.0 mm
[4.409inch]
2 x
Ø4/8mm
[Ø0.16/0.32inch]
2 x
Ø4x8mm
[Ø0.16x0.32inch]
118.0 mm
[4.646inch]
TT3088-01GB
To Next Page
Loading...