K-TRON K-Commander User Manual

805.20
K-Commander Loss-in-Weight Programming
Rev: G Produced by the K-Tron Institute
LWF Page 01: Feed Factor Setup, Continued
Page 01 special
key list
Key
Number
Key Name Description
F3 Calibrate Cycle This function is special to loss-in-
weight control. By using the
calibrate function, you can
determine the capacity of your
feeder. The procedure for
Feedfactor Calibration follows this
section.
Continued on next page

K-TRON K-Commander Specifications

General

Brand	K-TRON
Model	K-Commander
Category	Control Panel
Language	English