805.90
K-Commander Loss-in-Weight Programming
Rev: G Produced by the K-Tron Institute
Alarm Shutdown Masking, Continued
Alarm
shutdown
mask con't
Example: I do not want a Int. Channel Range Error to shutdown the
feeder. I would then subtract the Int. Channel Range Error decimal
value from the default value and enter the new value.
16,777,151 (default)
- 524,288 (decimal value of Int. Channel Range
Error
--------------
New Value 16,252,927
Note: The default value is 16,777,151 because the Low Battery should
not shutdown the feeders.
To Next Page
Loading...
