Kaba 1460 - Navigation Keys and ENTER; Wireless Programming

Operation User manual
14 k1evo809en-2014-04 Kaba programmer 1460
4.4 Navigation keys and ENTER
4.5 Alphanumeric keys and home
4.6 Wireless programming
Configuring and programming is carried out wireless-
ly, directly via the radio interface.
The 3 keys under the menu keys are the two naviga-
tion keys UP and DOWN, and the confirmation key
ENTER.
Using the UP and DOWN keys, the next submenu
(marked) is selected, for example, and is opened by
pressing the ENTER key.
Alphanumeric keys have a multiple assignment, with
which letters and various characters can be entered.
See chapter 5.3.7 on page 19 with regard to this.
The Home key always leads back to the previous
menu, from each menu and each dialogue box.
ENTER
Do not remove the Programmer from the ac-
tuator antenna range during data transfer.
Take note of the signals and Programmer dis-
play.
The Programmer should therefore be held with its
front directly on the actuator antenna.