User manual Product description
Kaba programmer 1460 k1evo809en-2014-04 9
3 Product description
Kaba stand-alone actuators can be programmed and
configured by specialist staff using the Programmer.
At the same time, the Programmer is the connection
(interface) between the software and the actuators.
3.1 Scope of supply
The Programmer is supplied with the following
accessories:
• 1 USB cable (for configuring and charging),
• 1 mains adaptor,
• 1 CD containing the software,
• 1 quick start guide.
3.2 Technical specifications
Dimensions
W x H x D 88 x 190 x 40 mm
Weight 350 g
Power supply
Battery NiMH
Ext. Supply USB, 5 V / max. 350 mA
Charger 100 - 240 V AC, 50-60 Hz
Interfaces
Radio NFC: wireless communication with the actuators
USB
USB interface for PC connection (transfer to and
from software)
Storage capacity (internal SD card)
Systems,
authorisation,
Traceback
Approx. 200 data records can be stored per locking
system
Operating conditions
Protection class IP40
Temperature 0 to 50 °C
Humidity 0 to 95% RH, non-condensing
To Next Page
Loading...