Kaba 1460 - Manual Settings

Programming User manual
38 k1evo809en-2014-04 Kaba programmer 1460
6.3.4 Configuration
The configuration data is to be imported from an actu-
ator to the Programmer.
6.4 Manual settings
The basic settings on the actuators are implemented
using the Programmer in the Settings/Actuator
menu.
See Chapter 5.4.
The existing configuration data for the
actuator stored on the Programmer will be
overwritten following confirmation.
1. Press Import menu key.
2. Log in to the actuator using Programming
master.
3. Select Configuration menu and confirm
using the ENTER key.
The configuration of the actuator will be read
out and confirmed.