Kaba 1460 - Commissioning; Programmer Settings

User manual Commissioning
Kaba programmer 1460 k1evo809en-2014-04 15
5Commissioning
This chapter outlines the commissioning of the Pro-
grammer in the Settings menu.
5.1 Switching on the Programmer
5.2 Settings
5.3 Programmer settings
1. Press the on/off key for approx. 2 seconds.
The main menu (Home) opens.
In the Settings menu you will find
settings for:
• the actuators,
• the data on the memory card (SD card),
• the Programmer,
• the firmware update,
• the emergency power supply.
1. Press the Settings menu key.
The settings menu opens.
2. Select the Programmer menu using the
navigation keys UP and DOWN and confirm
using the ENTER key.
The submenus are displayed.