Kaba 1460 - Actuator Settings

Commissioning User manual
20 k1evo809en-2014-04 Kaba programmer 1460
5.4 Actuator settings
5.4.1 Setting the clock
5.4.2 Beep tone
The programming master medium is required
for some settings. Keep programming master
to hand.
1. Open settings menu. (See Chapter 5.2.)
2. Log in to the actuator using Programming
master.
3. Select the Setting the time submenu and con-
firm using the ENTER key.
4. Select yes. The time changes to the current
time.
Setting the beep tone does not depend upon
the software on the actuators.
1. Open settings menu. (See Chapter 5.2.)
2. Log in to the actuator using Programming
master.
3. Select the Beep tone submenu and confirm
using the ENTER key.
4. Select Beep tone on or off and confirm using the
ENTER key.